Jan 31, 2009. Location. Las Vegas, Nevada. TDI. 2009 JSW TDI (gone but not forgotten) Apr 10, 2012. #2. Revo keeps the stock tune and the "tuned" tune both in the ECU and it requires a SPS (Serial Port Switch) to switch between them. The APR tune which is currently in Beta testing also has similar ability.

The PD 1.9 comes in 100, 115, 130, 150 power units. There is even talk of a 175!! Same displacement I think, all turbo size and electronics. Matt . There is also a 90 Hp - version of the 1.9 TDI PD. They put it in the VW Sharan, Ford Galaxy, Seat Alhambra. It has 90 Hp and 240 Nm with 6-speed tranny.

Software engine tuning/remapping is one of the simplest and most cost-effective ways to improve the engine's power and efficiency. For the 1.6 TDI engine, OBD II Tuning provides a software tune/remap and most mappers will offer customers two choices which are: Economy that gives a power increment of 30 bhp and torque is increased by 31 lb-ft; Product Information. Our PDd Diesel Tuning Box for the Volkswagen Beetle 1.9 TDI 104 BHP / 105 PS / 77 KW / 240 NM / 177 LBFT from TDI-Tuning is an advanced yet versatile engine tuning solution for VAG vehicles manufactured with the Pumpe Duse injection system. With our PDd Diesel Tuning Box installed you can expect to see increased power and
Re: VW Bora 1.9 tdi - would like advise on engine mods – 06-04-2013, 07:19 PM. A couple of tuning companies are site sponsors here and they can do you a good deal. You'd need to heavily modify it to get a lot more power out of, injectors, pistons, camshaft, turbo etc. This will mean a new performance clutch kit and if you haven't got poly
Even the turbo + exhaust manifold from a 1.9 turbo diesel will fit. 1.6 turbos are generally bigger (MUCH bigger than any TDI turbo), with no maximum boost until around 3,000 RPM. The 1.9 TD turbos are smaller and although it may be a better choice for daily driving, it will cause higher EGT due to extra backpressure from the smaller turbine.
What you do is install the cam and hub, turn the cam CW and pin it with the cam indexing tool. After that, you turn the crank CW and pin it with the crank tool. And finally, install the T/B following the install part of the T/B procedure. Same way with the non advanced method.
bJ1ehpn.
  • qnwiyq0w08.pages.dev/47
  • qnwiyq0w08.pages.dev/303
  • qnwiyq0w08.pages.dev/107
  • qnwiyq0w08.pages.dev/402
  • qnwiyq0w08.pages.dev/117
  • qnwiyq0w08.pages.dev/290
  • qnwiyq0w08.pages.dev/285
  • qnwiyq0w08.pages.dev/264
  • how to tune 1.9 tdi